Description

Item number : 310309
Application: CAM72 with M6
Dimensions: Connection: AMP – TE 8-215083-0 Wire to board connector
Operating voltage: 12V DC
Voltage range: 2.5V – 4.2V Shunt
Resistance: 3.2 Ohm
Balancing Current Inom: 1A at 3,2V (max. 1,3A at 4,2V)
Ptot: 3.2W (max. 5.5W)
Voltage measurement accuracy: +/-10mV
Temperature range: -40°C to +80°C
Temperature measurement accuracy: 2K

Please note during installation:

After placing the cell connectors on the poles, the cell boards are screwed onto the cell connectors. For a secure contact we recommend to secure the cell connector with threaded bolt, washer and nut. The cell board is then mounted on the cell connector. Make sure that the polarity of the cell and the cell board is the same (+ and – polarity is marked on the board)! The cell board must not lie directly on the connector, the resistor is on the back. This can otherwise be damaged under certain circumstances, we assume no liability for damage caused by disregard.